By adding the patented SMARTKIT system to Powerful-Silent, automatic dosing of the chemical, pre-spraying of the carpet with a concentrated solution, and rinsing of the carpet can be carried out.

The concentrated chemical is contained in a canister, while the machine tank contains only clean water. When the use of chemical is required, the machine automatically uses it in the optimal concentration, either during extraction cleaning or carpet pre-spray.

Using the special hose and gun, carpet prespray can be carried out by spraying a concentrated solution of chemical, which is left to act for a few minutes before extraction cleaning. The prolonged action of the chemical facilitates the removal of dirt from the fibers, enabling better cleaning results and speeding up subsequent cleaning operations.

During carpet extraction cleaning, the machine delivers a controlled concentration of product without requiring the operator to perform any dilution. This avoids incorrect concentrations and wastage of product.

With SMARTKIT, carpet rinsing can be carried out by simply turning a lever. The rinsing step is recommended to remove any sticky residue of chemical from the carpet fibers, which would otherwise cause rapid re-washing after washing. By rinsing the carpet at the end of the cleaning process, it will slowly resoil as it did when it was new.

If the prespray is carried out completely over the entire surface, no additional chemical will need to be used in subsequent cleaning operations, but extraction cleaning can be done using only clean water. In this way, cleaning and rinsing are carried out at the same time, saving time, detergent and water.

Using the machine with SMARTKIT in pre-spray mode, a sanitizing solution can be sprayed onto the carpet with the hand gun. The sprayed solution will act within minutes against bacteria and viruses. Alternatively, the outlet of the SMARTKIT can be connected to the spray manifold located under the machine. The carpet is sprayed and brushed by the machine, which moves forward without vacuuming. In this way, large areas can be treated in a short time (up to 1200 sq m/h).

In both cases, the SMARTKIT device performs automatic dosing of the sanitizing chemical, providing optimal concentration and avoiding waste.

Quick carpet sanitization can be carried out periodically on previously cleaned surfaces. Carpet cleaning and sanitizing can be carried out using the same machine.

Cleaning companies, hotels, conference halls, offices, banks, shops, cinemas, theatres, ferry boats, ships, airports, school, universities, shopping centres, places of worship, mosques and all places with large surfaces of carpet.

1. It is possible to clean up to 600 sq meters in one hour, thanks to the working forward system of the machine.
2. The tanks, with 70 litres each, allow a long working autonomy and reduce the idle time necessary for the tank filling and draining.
3. Very light to operate even on thick carpet and on slopes thanks to the driving motor with adjustable speed.
4. Speed regulation that allows to maintain a constant speed on slopes.
5. Very quiet operation, which allows the machine to be used without discomfort to the operator and other people. The machine can also be used during normal work activities and in particularly noise-sensitive environments, such as hotels, offices, and banks.
6. The two three-stage high-waterlift motors enable unparalleled dirt removal and a very short drying time: carpet can be dried in 1 hour!
7. Powerful and reliable rotary brush motor for vigorous brushing action.
8. Ability to adjust the height of the rotating brush to suit the type of carpet and degree of dirt.
9. Replaceable brush easily and without turning the machine over.
10. By rotating a lever, it is possible to select deep cleaning or maintenance cleaningmode, increasing or decreasing the flow rate of water sprayed.
11. Special profile of the vacuum head for better drying.
12. The sprung vacuum head allows the best suction also in case of uneven floor.
13. It is possible to regulate the pressure of the vacuum head according to the carpet thickness.
14. All controls are placed at a comfortable height for the operator.
15. The spraying of water can be continuous or otherwise activated by a spray lever. 
16. "Quick-disconnect" spray nozzles, replaceable by hand without the use of tools. Nozzles can be cleaned easily. The entire nozzle holder manifold can be taken out of the machine without having to bend the machine to one side to disassemble the nozzles.
17. Possibility of attaching the instant water heater (HT1800) to the machine body to increase cleaning efficiency.
18. With the addition of the patented SMARTKIT system, automatic chemical dosing, carpet pre-spray and rinsing is possible.
19. Possibility to connect the machine with optional external hoses and accessories that can be attached to the machine, such as a carpet cleaning wand or a hand tool for cleaning upholstered fabrics and hard-to-reach corner.
20. Possibility to clean both carpet and hard floor with a single machine by using the optional squeegee SQ720E. The squeegee is connected to the machine thanks to a quick disconnect coupling and does not require to use any tool.
21. Possibility to use an optional harder brush specific for hard floor.

1. High density polyethylene tanks, very strong and made for lasting a long time.
2. Transparent unbreakable cover, which allows to see the dirty water while it is sucked.
3. Easy to reach hole for filling the tank with clean water.
4. Drainpipe for easily emptying the recovery tank.
5. Drain valve for draining completely the solution tank.
6. The filter of the vacuum motor is easy to reach and removable for an easy cleaning. Its large filtering surface area allows it to work for a long time at maximum suction power.
7. Strong wheels, in antimark rubber.
   
8. The gaskets are not glued and replaceable by hand. Easy to clean and change.
9. Brass quick-disconnect couplings, reliable and strong.
10. Water pump with internal bypass, which allows an automatic regulation of the optimal water flow according to the tool used. Moreover, the bypass device makes the pump more reliable and avoids problems in the years.
11. Water pump with external rectifier, specially sized for a greater reliability.
12. Vacuum motor with thermal protection against overload.
13. Vacuum motor treated against rust.
14. Both motor and pump can work continuously.
15. Stainless steel brush bearings for a longer life.
16. Brush motor with thermal protection against overload.
    
17. Modular design that makes the maintenance easier. It can be done at low costs.