The cleaning and sanitizing process takes place in four stages:
-
Spraying
of chemical solution on vertical surfaces and sanitary fixtures
-
Chemical action
against dirt and bacteria
-
Rinsing with clean water
-
Rinsing the floor with the injection-extraction system
The manual gun allows you to spray concentrated chemical and to rinse vertical surfaces and sanitary fixtures.
The special wand included allows you to clean hard floors with the injection-extraction system: a chemical solution is sprayed on the floor and vacuumed. The dirt detached from the floor is completely removed thanks to the powerful vacuum and collected in the recovery tank.
In few second the floor gets perfectly dry and with no effort.
It is possible to inject and vacuum simultaneously, or to inject, brush and then vacuum. A specific bristle on the vacuum head allows you to brush efficiently very dirty floors.
It is not necessary to manually dose the chemical, because the machine automatically picks up the right quantity of chemical from the chemical tank and mixes it with clean water, taken from the water tank.The chemical is always used in the correct quantity and never wasted.
Eveline really
removes the dirt from walls and hard floor without leaving any residual dirt on the surfaces and represents today the ideal solution, replacing manual equipment which move dirt and bacteria from place to place.
Eveline makes the job effective, quick, pleasant. The areas are completely cleaned, sanitized, dried and perfumed.
Small and light
, Eveline can be easily carried from place to place and stored after use.
Eveline allows a sanitizing chemical to be
nebulized to quickly sanitize previously cleaned surfaces and
environments. It is possible to use two nebulization systems:
a) nebulization@100micron - for surfaces
b) turbo-nebulization@50micron - for surfaces and
environments
With a specific manual gun it is possible to nebulize a sanitizing chemical in the form of a liquid solution in 100 micron particles. With the nebulization at 100 micron the particles deposit evenly on the surfaces wetting them slightly
and after a few minutes the particles evaporate, leaving the surfaces
dry. In this way the chemical is able to act for the necessary time to
carry out its sanitizing action. This is the ideal solution to quickly
sanitize all washable surfaces
.
With a specific hand gun supplied with the machine, it is possible to perform surface sanitization with turbo-nebulization@50micron.
With the gun for turbo-nebulization@50micron it is possible to deliver
a mixture of air and very fine particles of pure sanitizing product with a diameter of only 50micron.
Their small size allows the particles to remain in suspension in the sanitizing air jet, which can reach points 4 meters away from the operator. By directing the jet appropriately, it can easily reach every point in the room and saturate small rooms quickly and evenly.
With turbo-nebulization@50micron, the particles wet surfaces very little, leaving them only slightly damp for a few minutes. In this way, the product is able to act for as long as it takes to perform its sanitizing action in all points.
This system is
ideal to quickly sanitize:
-
Restrooms (sinks, sanitary fixtures, tiled surfaces)
-
Food preparation areas (work tables, transport trolleys, equipment)
-
All types of washable surfaces.
