Quick sanitization of surfaces and any kind of environments
In any environment it is necessary to carry out a regular cleaning action to remove the visible dirt and also a periodic sanitization of all the surfaces, in order to eliminate even the non-visible elements such as germs and bacteria.
For cleaning and sanitizing all the washable surfaces Santoemma developed complete ranges of machines, specific for each area, which use either a cleaning and sanitizing solution or foam. These machines can be used periodically for maintenance or deep cleaning operations.
The same machines can also nebulize a specific chemical in order to quickly sanitize surfaces and the environments which have been cleaned already.
The two operations can be performed with the most appropriate frequency, according to the specific needs.
Santoemma developed 3 different sanitizing systems, in order to supply the ideal solution to every situation:
NEBULIZATION@100MICRON -> for surfaces
TURBO-NEBULIZATION@50MICRON -> for surfaces and environments
DRY FOG@7MICRON -> for surfaces and environments
The numbers 100, 50 and 7 refer to the size of the chemical particles. Smaller particles allow both surfaces and environments to get less wet.
With NEBULIZATION@100MICRON large surfaces can be quickly sanitized, by spraying a finely nebulized sanitizing solution on them.
Also with the TURBO-NEBULIZATION@50MICRON system it is possible to direct the sanitizing jet directly on the surfaces to be treated. Moreover, since the sanitizing jet can reach points 4 meters away from the operator, it is also possible to direct the jet in the air inside the rooms, in order to easily reach every point and to saturate small rooms quickly and uniformly.
With the DRY FOG@7MICRON system, surfaces can be sanitized without wetting them, using a specific manual gun or a special device that autonomously distributes dry fog inside the rooms.
Some Santoemma models, equipped with a specific gun, are able to nebulize the sanitizing chemical in the form of a liquid solution in 100micron particles.
With the nebulization at 100micron the particles deposit evenly on the surfaces wetting them slightly and after a few minutes the particles evaporate, leaving the surfaces dry. In this way the chemical is able to act for the necessary time to carry out its sanitizing action.
This is the ideal solution to quickly sanitize washrooms, showers, washable walls, tables, support surfaces, handrails, work equipment, transport trolleys and in general all washable surfaces.
public offices, hotels, holiday villages, hostels,
wellness centers, sports centers, swimming pools,
restaurants, self-service, fast-food outlets, bar, pubs, service stations,
municipal public toilets, public transport,
shopping malls, shops, supermarkets,
private companies, mechanical workshops,
Some Santoemma machines are able to nebulize a sanitizing chemical through a specific hand gun. This gun can spray a mix of air and very small liquid particles, with a diameter of 50micron only.
Their small size allows the particles to float in the air jet and to easily reach every point of the environment. The sanitizing jet can reach points 4 meters away from the operator. By directing the jet properly, small environments can be saturated quickly and evenly.
With 50micron turbo nebulization the particles leave very little moisture on the surfaces, setting evenly and leaving them only slightly moist for a few minutes. In this way the chemical is able to act for the necessary time to perform its sanitizing action on every point.
Food preparation areas (work tables, transport trolleys, equipment)
All types of washable surfaces.
Moreover, this system is also suitable for treating the inside of cars, trucks, busses and other vehicles, in places such as:
Car body shops,
The sanitizing particles are nebulized into the passenger compartment, saturating it, and reaching even the most difficult to reach places, including air conditioning ducts.
Santoemma developed specific solutions to sanitize with dry fog@7micron. Using a dry fog with particles of very small diameter, only 7micron, it is possible to sanitize without wetting the surfaces.
The dry fog is delivered for the necessary time to completely fill the environments and then it is left to act for some minutes, in order to perform its sanitizing action.
This technology allows you to carry out the complete sanitization of the environments, since the sanitizing chemical acts even in the most hard-to-reach spots and also in areas where it is not possible to spray any liquid.
The machine can be left inside the room to be treated. Alternatively, you can leave the machine out of the room, placing inside only the chemical tank. With a specific gun it is also possible to nebulize sanitizing dry fog also directly on surfaces of limited extension.
The dry fog sanitizing system is ideal for periodically sanitizing small and medium-sizedrooms, in different environments.
nursing homes, hospitals, ambulances,
schools, universities, student colleges,
barracks, hotels, hostels,
spas, wellness centers, thermariums
sports centers, gyms, swimming pools,
exhibition halls, stadiums, arenas,
bingo halls, casino, billiard rooms,
motorway cafés, service stations,
municipal public toilets,
ferries, cruise ships, yachts, private boats,
railway stations, airports, trains, planes,
buses, trams, buses, shuttles, subways,
shopping malls, shops, pharmacies,
offices, private companies,
mechanical workshops, factories,
cooked food production companies, catering companies,
butchers, dairies, bakeries, pastry companies,
food transportation vehicles,
Different Santoemma models can nebulize sanitizing chemical product in environments or on surfaces. The models of the FOOD, RESTROOM, EVELINE and some models of the CARPET, UPHOLSTERY and CAR Wash programs can be used with special Santoemma devices to perform this function as well.
Some models are supplied as standard with accessories that allow nebulization. For other models the nebulization accessories are optional devices.
The following tables show the sanitization systems that can be used with each model.
Nebulization @100micron for surfaces
Turbo-nebulization @50micron for surfaces/environments